Citrix NetScaler Vulnerability CVE-2026-120868 (ADC / Gateway Memory Overflow)
How to Check Exposure and Upgrade to 14.1-73.57 or 13.1-64.39
NetScaler CVE-2026-120868: packet-processing memory overflow, CVSS v4.0 9.3, hits default configs. Affected and fixed builds, checks, HA upgrade order, fixes.
Citrix security bulletin CTX697305, published on 12 November 2026, fixes 28 memory-related vulnerabilities in NetScaler ADC and NetScaler Gateway at once. One of them, CVE-2026-120868, is a memory overflow in packet processing with a CVSS v4.0 score of 9.3, and it affects every deployment, including the default configuration. Exploitation has not been reported, but if you run NetScaler yourself, the basic fix is to move to 14.1-73.57 or later on the 14.1 branch, or 13.1-64.39 or later on the 13.1 branch.
This article is based on the Citrix bulletin CTX697305, the NVD entry and the CERT-EU advisory. It covers the affected builds, how to check, what to do for each environment, and what you can do while you cannot patch. Numbers and dates are limited to what we could confirm in primary sources, and anything not published is stated as such. For the wider picture of the day, see the vulnerability digest for 15 November.
The key points in three lines
- What: NetScaler ADC / Gateway has a memory overflow in packet processing (CVE-2026-120868, CVSS v4.0 9.3). Multiple other memory overflows in Gateway (SSL VPN and similar) and AAA virtual servers (CVE-2026-107412, 9.5) were also fixed. The bulletin covers 28 CVEs in total and is rated Critical.
- Who: Organizations running customer-managed NetScaler ADC or Gateway. Builds before 14.1-73.57 on 14.1 and before 13.1-64.39 on 13.1 are affected, and CVE-2026-120868 applies regardless of configuration. Citrix-managed cloud services are updated by Cloud Software Group.
- What to do today: (1) check the build of every appliance, (2) schedule the upgrade if it is affected, and (3) put internet-facing Gateway and AAA appliances first. The bulletin lists no workaround, so upgrading is the only permanent fix.
Affected and fixed builds at a glance
The table lists the affected and fixed builds from the bulletin. If your build is at or above the fixed build, it is outside this bulletin.
| Branch | Affected builds | Fixed builds |
|---|---|---|
| NetScaler ADC / Gateway 14.1 | Before 14.1-73.57 | 14.1-73.57 and later |
| NetScaler ADC / Gateway 13.1 | Before 13.1-64.39 | 13.1-64.39 and later |
| NetScaler ADC 14.1-FIPS | Before 14.1-73.58 FIPS | 14.1-73.58 FIPS and later |
| NetScaler ADC 13.1-FIPS / 13.1-NDcPP | Before 13.1-37.293 | 13.1-37.293 and later |
The bulletin also says that Secure Private Access Hybrid deployments that use NetScaler instances are affected, and those instances must be upgraded too. On the other hand, the bulletin applies to customer-managed NetScaler ADC and Gateway; Citrix-managed cloud services and Citrix-managed Adaptive Authentication are updated by Cloud Software Group.
What is happening
CVE-2026-120868 affects you even if you change nothing
NetScaler sits at the entrance for load balancing (ADC) and remote access (Gateway) and is the first thing to receive traffic from outside. CVE-2026-120868 is a memory-handling error in the core packet-processing code that can lead to unpredictable behavior or denial of service. The NVD description uses the same wording, and the CVSS v4.0 base score is 9.3 (Critical), with a vector of AV:N/AC:L/AT:N/PR:N/UI:N: reachable over the network, low complexity, no privileges and no user interaction. The NVD score was listed as secondary-source data at the time of writing, so read it together with the bulletin.
What makes this one notable is that the bulletin says all deployments are affected, including the default configuration, regardless of which features are enabled. Most vulnerabilities come with a condition such as using SAML authentication or enabling HTTP/3, and you can judge exposure by reading your configuration. CVE-2026-120868 has no such condition, so the build number is the only thing that matters.
The other 27 fixes
The bulletin handles 28 CVEs together. CERT-EU singles out CVE-2026-107412 (CVSS v4.0 9.5), which concerns Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy) and AAA virtual servers and can be reached without authentication, and recommends upgrading internet-facing Gateway and AAA appliances first. The rest apply when specific features are used, such as DNS, DoH, HTTP/2, HTTP/3 (QUIC), SMPP, RTSP, BGP, Application Firewall, SAML, LDAP and Email OTP. According to CERT-EU, ten are scored as high impact on confidentiality, integrity and availability, but the vendor describes the impact only as unpredictable behavior and denial of service, and no remote code execution is stated.
| CVE | Issue | CVSS v4.0 | Precondition (summary of the bulletin) |
|---|---|---|---|
| CVE-2026-120868 | Memory overflow in packet processing | 9.3 | None (all deployments, default config) |
| CVE-2026-107407 | Memory overflow on SMPP traffic | 9.3 | LB or CS vserver of type SMPP |
| CVE-2026-107408 | DNS / DoH out-of-bounds write | 9.3 | DNS load balancing and recursive resolution |
| CVE-2026-107409 | DoH double free | 9.3 | DNS load balancing over HTTPS |
| CVE-2026-107410 | PUSH heap overflow | 9.3 | LB vserver of type PUSH |
| CVE-2026-107411 | RTSP ALG memory overflow | 8.7 | RTSP LB vserver, or RTSP ALG on an LSN group |
| CVE-2026-107412 | Multiple memory overflows in Gateway / AAA | 9.5 | Gateway (VPN) or AAA vserver |
| CVE-2026-107413 | SAML authentication heap overflow | 8.7 | SAML action configured |
| CVE-2026-107414 | WebAuth authentication heap overflow | 8.7 | WebAuth action configured |
| CVE-2026-107415 | Email OTP heap overflow | 9.3 | Email action configured |
| CVE-2026-111340 | KBA stack overflow | 8.7 | LDAP action with KBAttribute, or Email action |
| CVE-2026-111341 | Client-certificate authentication buffer copy | 8.7 | Certificate authentication action (CertAction) |
| CVE-2026-111342 | LDAP authentication buffer copy | 8.7 | Gateway or AAA vserver |
| CVE-2026-111333 | Authentication request buffer copy | 6.9 | Gateway or AAA vserver (local vector) |
| CVE-2026-111334 | Endpoint Analysis (EPA) overflow | 9.3 | VPN or AAA vserver with EPA |
| CVE-2026-111335 | Request handling DoS (reboot loop) | 6.9 | Appliance reachable on the data path |
| CVE-2026-111336 | HTTP/2 out-of-bounds write | 8.3 | HTTP/SSL vserver with HTTP/2 in its profile |
| CVE-2026-111337 | Base64 decoding overflow in policies | 8.7 | B64DECODE policy bound, or AppFW configured |
| CVE-2026-111338 | Sensitive authentication data written to log | 6.9 | Local read access to the HTTP error log after logout |
| CVE-2026-111339 | AppFW decompression / inspection overflow | 6.9 | AppFW profile with affected protections |
| CVE-2026-120860 | Diameter / SIP-TCP / MQTT / RADIUS load-balancing overflow | 8.7 | LB vserver of one of those types |
| CVE-2026-120861 | GSLB / geolocation overflow | 8.7 | GSLB MEP, static proximity, geolocation policy, or config sync |
| CVE-2026-120862 | SIP ALG / DNS answer logging overflow | 8.7 | SIP ALG on an LSN group, or DNS answer-section logging |
| CVE-2026-120863 | Management plane overflow | 8.7 | Untrusted host can reach the NSIP / NSIP6 address |
| CVE-2026-120864 | ICA proxy overflow | 9.3 | Gateway, AAA or CR vserver of type HDX |
| CVE-2026-120865 | HTTP/3 (QUIC) overflow | 8.7 | LB or CS vserver of type HTTP_QUIC |
| CVE-2026-120866 | BGP out-of-bounds write | 7.7 | BGP enabled with a neighbor lacking TCP-MD5 authentication |
| CVE-2026-120867 | SSL/TLS/DTLS overflow | 8.7 | TLS 1.3 with ECH, ECH on a QAT platform, or a SafeNet HSM key |
The preconditions are a summary; see each CVE entry in CTX697305 for the exact conditions and configuration patterns. The bulletin's changelog also records that on 12 November the numbers CVE-2026-111333 through CVE-2026-111339 were corrected. If you saved an earlier copy, check that the numbers match.
How to check whether you are affected
Because CVE-2026-120868 applies regardless of configuration, start with the build. The bulletin itself gives no command for checking the version; you compare against the fixed builds. The command below is a general NetScaler CLI command. In the GUI, the system information page shows the current build.
# 1. Check the build (not in the bulletin; a general NetScaler CLI command)
show ns version
# Example output: NetScaler NS14.1: Build 73.xx.nc
# Not affected if 14.1 is 73.57 or later, or 13.1 is 64.39 or later (see the table for FIPS / NDcPP)
# 2. Do Gateway / AAA virtual servers exist? (for CVE-2026-107412 etc.; the bulletin's patterns are add vpn vserver / add authentication vserver)
show vpn vserver
show authentication vserver
# 3. Search the saved configuration for the bulletin's patterns
shell
grep -E "add vpn vserver|add authentication vserver" /nsconfig/ns.conf
grep B64DECODE /nsconfig/ns.conf
exitChecks 2 and 3 help you understand which of the other vulnerabilities also apply to you; they are not a reason to skip the upgrade. CVE-2026-120868 alone is enough to justify it. The bulletin gives configuration patterns for each precondition (for example add lb vserver .* SMPP, add authentication samlAction, and show ns feature with show router dynamicRouting for BGP), which are useful for deciding the order of upgrades or which features you could turn off in the meantime. Note, however, that they confirm the preconditions of the other CVEs and do not determine whether CVE-2026-120868 applies to you.
If you have no in-house administrator or you outsource operations, ask your vendor for the model, current build, whether the appliance is in an HA pair, and whether the management interface (NSIP) is restricted by source address, and have them reply in writing.
What to do in each environment
On-premises ADC / Gateway (14.1 and 13.1)
Move 14.1 to 14.1-73.57 or later and 13.1 to 13.1-64.39 or later, following the normal Citrix upgrade procedure (obtain the build file, upload it to the appliance, run it and reboot). CERT-EU recommends upgrading internet-facing Gateway and AAA appliances first. If you run several, start with the ones exposed to the internet. Back up the configuration (such as ns.conf) beforehand.
Order of upgrade for HA pairs
The bulletin gives no HA procedure. In Citrix's general procedure, you upgrade the secondary first and reboot it, fail over so the secondary becomes active, then upgrade the original primary. For the exact steps and caveats, such as how configuration sync behaves while the two nodes are on different builds, check the official upgrade guide for your version. Work during a low-traffic window and decide the rollback method in advance.
FIPS / NDcPP appliances
FIPS and NDcPP appliances have their own fixed builds rather than 14.1-73.57 or 13.1-64.39: 14.1-73.58 FIPS or later for 14.1-FIPS, and 13.1-37.293 or later for 13.1-FIPS and 13.1-NDcPP. Do not conclude that you are fine because the regular build number is 73.57 or higher. FIPS appliances may handle some things differently during an upgrade, so read the official procedure first.
Secure Private Access Hybrid deployments
The bulletin says Secure Private Access Hybrid deployments that use NetScaler instances are also affected, and those instances must be upgraded to the recommended builds in the table. Updating the cloud-side service and upgrading the NetScaler instances you manage yourself are separate tasks.
If you run 12.1, 13.0 or another build not named in the bulletin
The affected builds in the bulletin are the 14.1 and 13.1 branches and their FIPS / NDcPP builds only. Older branches such as 12.1 and 13.0 have neither an impact statement nor a fixed build, and the bulletin says nothing about end of support. So do not read that as meaning you are unaffected. You may be running a branch for which no fix is offered, and you should plan a move to a supported 13.1 or 14.1 branch with your vendor or Citrix support. For the interim, see the next section.
Citrix-managed cloud services
The bulletin applies to customer-managed NetScaler ADC and Gateway, and says Cloud Software Group updates Citrix-managed cloud services and Citrix-managed Adaptive Authentication. If you only use cloud services, you are not asked to upgrade anything yourself. Any on-premises appliances you still run are your responsibility.
Mitigations while you cannot patch
The bulletin lists no workaround. CVE-2026-120868 applies regardless of configuration, so no setting change is offered to avoid it. Upgrading is the only permanent fix, and setting a date for it is the top priority.
The following are not measures from the bulletin but general security practice to lower risk until you upgrade. Their effect is limited and they are not a substitute.
- Keep the management interface (NSIP) off the internet: the bulletin names untrusted hosts reaching the NSIP / NSIP6 as a precondition of CVE-2026-120863. Make management traffic reachable only from limited sources such as the internal network or a management VPN.
- Clean up unused virtual servers: look for leftover DNS, DoH, SMPP, PUSH or HTTP/3 virtual servers you do not use, and disable or delete them. This reduces the exposure to some of the other CVEs in the table.
- Watch logs and traffic more closely than usual: look for repeated reboots, unexpected crashes, or large volumes of traffic from unfamiliar sources.
- Set the upgrade date and tell the people involved: HA pairs can often be upgraded without a service stop. Ask your vendor early.
As for exploitation, the bulletin says nothing. CERT-EU notes that Citrix reports no exploitation and that no public proof of concept has been confirmed. That only means nothing has been published so far, not that it will not happen. Once patches are public, the time to build an attack from the fix tends to shrink, so do not postpone the upgrade because nothing has been published.
Timeline
| Date | Event |
|---|---|
| 12 November 2026 | Citrix (Cloud Software Group) publishes CTX697305 (initial version). CERT-EU publishes advisory 2026-020 |
| 12 November 2026 | The CTX697305 changelog records the correction of CVE-2026-111333 through CVE-2026-111339 |
| 13 November 2026 | CVE-2026-120868 is listed in NVD (status: Received) |
| 15 November 2026 | Time of writing. No exploitation has been published |
The bulletin credits several researchers and says Citrix's own product security team found some of the issues using AI-assisted code analysis. Advances in such analysis may be part of why 28 memory-related flaws were fixed at once, but the bulletin does not elaborate.
Checklist for today
- List every NetScaler ADC / Gateway you run, including production, test and Secure Private Access Hybrid instances
- Check each build with show ns version or the GUI and compare it with the fixed builds in the table
- Confirm 14.1 is at 14.1-73.57 or later, 13.1 at 13.1-64.39 or later, and FIPS / NDcPP at their own fixed builds
- Put internet-facing Gateway and AAA appliances first
- Back up the configuration before upgrading, and for HA pairs decide the order and the rollback method
- Check that the management interface (NSIP) is not reachable from untrusted sources
- If you run 12.1, 13.0 or another build the bulletin does not name, start planning a migration
- If operations are outsourced, ask the vendor in writing for the build and the planned date
Related articles
- Vulnerability digest for 15 November
- SonicWall vulnerability CVE-2026-19868 (SSLVPN SAML / MFA bypass): how to check and fix
- SSL-VPN vs IPsec: which suits telework
Sources
- Citrix, NetScaler ADC and NetScaler Gateway Security Bulletin, CTX697305: https://support.citrix.com/external/article/CTX697305/citrix-netscaler-adc-and-citrix-netscale.html
- NVD, CVE-2026-120868: https://services.nvd.nist.gov/rest/json/cves/2.0?cveId=CVE-2026-120868
- CERT-EU Security Advisory 2026-020: https://cert.europa.eu/publications/security-advisories/2026-020/
Frequently asked questions
Can I avoid it with a configuration change?
The bulletin lists no workaround. CVE-2026-120868 affects every deployment including the default configuration, so a setting change cannot avoid it and you need to upgrade to a fixed build.
Is it already being exploited?
The bulletin mentions no exploitation, and CERT-EU says Citrix reports none and no public PoC has been confirmed. That may change, so it is safer not to delay the upgrade just because nothing has been published.
I use Citrix cloud services. Do I need to do anything?
The bulletin says Cloud Software Group updates Citrix-managed cloud services and Adaptive Authentication. If you also run NetScaler appliances yourself, you upgrade those yourself.
Should I go to 13.1-64.39 or 14.1-73.57?
Upgrade to the fixed build of the branch you are already on: 13.1-64.39 or later for 13.1, and 14.1-73.57 or later for 14.1. FIPS and NDcPP appliances have their own fixed builds (14.1-73.58 FIPS and 13.1-37.293). Moving across branches needs separate planning and testing.
I run 12.1 or 13.0. Am I fine?
The bulletin does not mention those branches, so you cannot read that as unaffected. Plan a move to a supported build with your vendor or Citrix support, and until then reduce exposure with general measures such as keeping the management interface off the internet.
株式会社オブライト
Oflight Inc. is a Tokyo-based IT company providing software development, digital signage, web development, network systems, and IoT/AR/VR technology services.
Related free tools (no sign-up, instant results)
Feel free to contact us
Contact Us